(** * Lists: Working with Structured Data *) Require Export Induction. Module NatList. (* ###################################################### *) (** * Pairs of Numbers *) (** In an [Inductive] type definition, each constructor can take any number of arguments -- none (as with [true] and [O]), one (as with [S]), or more than one, as in this definition: *) Inductive natprod : Type := pair : nat -> nat -> natprod. (** This declaration can be read: "There is just one way to construct a pair of numbers: by applying the constructor [pair] to two arguments of type [nat]." *) (** We can construct an element of [natprod] like this: *) Check (pair 3 5). (** *** *) (** Here are two simple function definitions for extracting the first and second components of a pair. (The definitions also illustrate how to do pattern matching on two-argument constructors.) *) Definition fst (p : natprod) : nat := match p with | pair x y => x end. Definition snd (p : natprod) : nat := match p with | pair x y => y end. Eval compute in (fst (pair 3 5)). (* ===> 3 *) (** *** *) (** Since pairs are used quite a bit, it is nice to be able to write them with the standard mathematical notation [(x,y)] instead of [pair x y]. We can tell Coq to allow this with a [Notation] declaration. *) Notation "( x , y )" := (pair x y). (** The new notation can be used both in expressions and in pattern matches (indeed, we've seen it already in the previous chapter -- this notation is provided as part of the standard library): *) Eval compute in (fst (3,5)). Definition fst' (p : natprod) : nat := match p with | (x,y) => x end. Definition snd' (p : natprod) : nat := match p with | (x,y) => y end. Definition swap_pair (p : natprod) : natprod := match p with | (x,y) => (y,x) end. (** *** *) (** Let's try and prove a few simple facts about pairs. If we state the lemmas in a particular (and slightly peculiar) way, we can prove them with just reflexivity (and its built-in simplification): *) Theorem surjective_pairing' : forall (n m : nat), (n,m) = (fst (n,m), snd (n,m)). Proof. reflexivity. Qed. (** Note that [reflexivity] is not enough if we state the lemma in a more natural way: *) Theorem surjective_pairing_stuck : forall (p : natprod), p = (fst p, snd p). Proof. simpl. (* Doesn't reduce anything! *) Abort. (** *** *) (** We have to expose the structure of [p] so that [simpl] can perform the pattern match in [fst] and [snd]. We can do this with [destruct]. Notice that, unlike for [nat]s, [destruct] doesn't generate an extra subgoal here. That's because [natprod]s can only be constructed in one way. *) Theorem surjective_pairing : forall (p : natprod), p = (fst p, snd p). Proof. intros p. destruct p as [n m]. simpl. reflexivity. Qed. (** **** Exercise: 1 star (snd_fst_is_swap) *) Theorem snd_fst_is_swap : forall (p : natprod), (snd p, fst p) = swap_pair p. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 1 star, optional (fst_swap_is_snd) *) Theorem fst_swap_is_snd : forall (p : natprod), fst (swap_pair p) = snd p. Proof. (* FILL IN HERE *) Admitted. (** [] *) (* ###################################################### *) (** * Lists of Numbers *) (** Generalizing the definition of pairs a little, we can describe the type of _lists_ of numbers like this: "A list is either the empty list or else a pair of a number and another list." *) Inductive natlist : Type := | nil : natlist | cons : nat -> natlist -> natlist. (** For example, here is a three-element list: *) Definition mylist := cons 1 (cons 2 (cons 3 nil)). (** *** *) (** As with pairs, it is more convenient to write lists in familiar programming notation. The following two declarations allow us to use [::] as an infix [cons] operator and square brackets as an "outfix" notation for constructing lists. *) Notation "x :: l" := (cons x l) (at level 60, right associativity). Notation "[ ]" := nil. Notation "[ x ; .. ; y ]" := (cons x .. (cons y nil) ..). (** It is not necessary to fully understand these declarations, but in case you are interested, here is roughly what's going on. The [right associativity] annotation tells Coq how to parenthesize expressions involving several uses of [::] so that, for example, the next three declarations mean exactly the same thing: *) Definition mylist1 := 1 :: (2 :: (3 :: nil)). Definition mylist2 := 1 :: 2 :: 3 :: nil. Definition mylist3 := [1;2;3]. (** The [at level 60] part tells Coq how to parenthesize expressions that involve both [::] and some other infix operator. For example, since we defined [+] as infix notation for the [plus] function at level 50, Notation "x + y" := (plus x y) (at level 50, left associativity). The [+] operator will bind tighter than [::], so [1 + 2 :: [3]] will be parsed, as we'd expect, as [(1 + 2) :: [3]] rather than [1 + (2 :: [3])]. (By the way, it's worth noting in passing that expressions like "[1 + 2 :: [3]]" can be a little confusing when you read them in a .v file. The inner brackets, around 3, indicate a list, but the outer brackets, which are invisible in the HTML rendering, are there to instruct the "coqdoc" tool that the bracketed part should be displayed as Coq code rather than running text.) The second and third [Notation] declarations above introduce the standard square-bracket notation for lists; the right-hand side of the third one illustrates Coq's syntax for declaring n-ary notations and translating them to nested sequences of binary constructors. *) (** *** Repeat *) (** A number of functions are useful for manipulating lists. For example, the [repeat] function takes a number [n] and a [count] and returns a list of length [count] where every element is [n]. *) Fixpoint repeat (n count : nat) : natlist := match count with | O => nil | S count' => n :: (repeat n count') end. (** *** Length *) (** The [length] function calculates the length of a list. *) Fixpoint length (l:natlist) : nat := match l with | nil => O | h :: t => S (length t) end. (** *** Append *) (** The [app] ("append") function concatenates two lists. *) Fixpoint app (l1 l2 : natlist) : natlist := match l1 with | nil => l2 | h :: t => h :: (app t l2) end. (** Actually, [app] will be used a lot in some parts of what follows, so it is convenient to have an infix operator for it. *) Notation "x ++ y" := (app x y) (right associativity, at level 60). Example test_app1: [1;2;3] ++ [4;5] = [1;2;3;4;5]. Proof. reflexivity. Qed. Example test_app2: nil ++ [4;5] = [4;5]. Proof. reflexivity. Qed. Example test_app3: [1;2;3] ++ nil = [1;2;3]. Proof. reflexivity. Qed. (** Here are two smaller examples of programming with lists. The [hd] function returns the first element (the "head") of the list, while [tl] returns everything but the first element (the "tail"). Of course, the empty list has no first element, so we must pass a default value to be returned in that case. *) (** *** Head (with default) and Tail *) Definition hd (default:nat) (l:natlist) : nat := match l with | nil => default | h :: t => h end. Definition tl (l:natlist) : natlist := match l with | nil => nil | h :: t => t end. Example test_hd1: hd 0 [1;2;3] = 1. Proof. reflexivity. Qed. Example test_hd2: hd 0 [] = 0. Proof. reflexivity. Qed. Example test_tl: tl [1;2;3] = [2;3]. Proof. reflexivity. Qed. (** **** Exercise: 2 stars (list_funs) *) (** Complete the definitions of [nonzeros], [oddmembers] and [countoddmembers] below. Have a look at the tests to understand what these functions should do. *) Fixpoint nonzeros (l:natlist) : natlist := (* FILL IN HERE *) admit. Example test_nonzeros: nonzeros [0;1;0;2;3;0;0] = [1;2;3]. (* FILL IN HERE *) Admitted. Fixpoint oddmembers (l:natlist) : natlist := (* FILL IN HERE *) admit. Example test_oddmembers: oddmembers [0;1;0;2;3;0;0] = [1;3]. (* FILL IN HERE *) Admitted. Fixpoint countoddmembers (l:natlist) : nat := (* FILL IN HERE *) admit. Example test_countoddmembers1: countoddmembers [1;0;3;1;4;5] = 4. (* FILL IN HERE *) Admitted. Example test_countoddmembers2: countoddmembers [0;2;4] = 0. (* FILL IN HERE *) Admitted. Example test_countoddmembers3: countoddmembers nil = 0. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, advanced (alternate) *) (** Complete the definition of [alternate], which "zips up" two lists into one, alternating between elements taken from the first list and elements from the second. See the tests below for more specific examples. Note: one natural and elegant way of writing [alternate] will fail to satisfy Coq's requirement that all [Fixpoint] definitions be "obviously terminating." If you find yourself in this rut, look for a slightly more verbose solution that considers elements of both lists at the same time. (One possible solution requires defining a new kind of pairs, but this is not the only way.) *) Fixpoint alternate (l1 l2 : natlist) : natlist := (* FILL IN HERE *) admit. Example test_alternate1: alternate [1;2;3] [4;5;6] = [1;4;2;5;3;6]. (* FILL IN HERE *) Admitted. Example test_alternate2: alternate [1] [4;5;6] = [1;4;5;6]. (* FILL IN HERE *) Admitted. Example test_alternate3: alternate [1;2;3] [4] = [1;4;2;3]. (* FILL IN HERE *) Admitted. Example test_alternate4: alternate [] [20;30] = [20;30]. (* FILL IN HERE *) Admitted. (** [] *) (* ###################################################### *) (** ** Bags via Lists *) (** A [bag] (or [multiset]) is like a set, but each element can appear multiple times instead of just once. One reasonable implementation of bags is to represent a bag of numbers as a list. *) Definition bag := natlist. (** **** Exercise: 3 stars, optional (bag_functions) *) (** Complete the following definitions for the functions [count], [sum], [add], and [member] for bags. *) Fixpoint count (v:nat) (s:bag) : nat := (* FILL IN HERE *) admit. (** All these proofs can be done just by [reflexivity]. *) Example test_count1: count 1 [1;2;3;1;4;1] = 3. (* FILL IN HERE *) Admitted. Example test_count2: count 6 [1;2;3;1;4;1] = 0. (* FILL IN HERE *) Admitted. (** Multiset [sum] is similar to set [union]: [sum a b] contains all the elements of [a] and of [b]. (Mathematicians usually define [union] on multisets a little bit differently, which is why we don't use that name for this operation.) For [sum] we're giving you a header that does not give explicit names to the arguments. Moreover, it uses the keyword [Definition] instead of [Fixpoint], so even if you had names for the arguments, you wouldn't be able to process them recursively. The point of stating the question this way is to encourage you to think about whether [sum] can be implemented in another way -- perhaps by using functions that have already been defined. *) Definition sum : bag -> bag -> bag := (* FILL IN HERE *) admit. Example test_sum1: count 1 (sum [1;2;3] [1;4;1]) = 3. (* FILL IN HERE *) Admitted. Definition add (v:nat) (s:bag) : bag := (* FILL IN HERE *) admit. Example test_add1: count 1 (add 1 [1;4;1]) = 3. (* FILL IN HERE *) Admitted. Example test_add2: count 5 (add 1 [1;4;1]) = 0. (* FILL IN HERE *) Admitted. Definition member (v:nat) (s:bag) : bool := (* FILL IN HERE *) admit. Example test_member1: member 1 [1;4;1] = true. (* FILL IN HERE *) Admitted. Example test_member2: member 2 [1;4;1] = false. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, optional (bag_more_functions) *) (** Here are some more bag functions for you to practice with. *) Fixpoint remove_one (v:nat) (s:bag) : bag := (* When remove_one is applied to a bag without the number to remove, it should return the same bag unchanged. *) (* FILL IN HERE *) admit. Example test_remove_one1: count 5 (remove_one 5 [2;1;5;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_one2: count 5 (remove_one 5 [2;1;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_one3: count 4 (remove_one 5 [2;1;4;5;1;4]) = 2. (* FILL IN HERE *) Admitted. Example test_remove_one4: count 5 (remove_one 5 [2;1;5;4;5;1;4]) = 1. (* FILL IN HERE *) Admitted. Fixpoint remove_all (v:nat) (s:bag) : bag := (* FILL IN HERE *) admit. Example test_remove_all1: count 5 (remove_all 5 [2;1;5;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_all2: count 5 (remove_all 5 [2;1;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_all3: count 4 (remove_all 5 [2;1;4;5;1;4]) = 2. (* FILL IN HERE *) Admitted. Example test_remove_all4: count 5 (remove_all 5 [2;1;5;4;5;1;4;5;1;4]) = 0. (* FILL IN HERE *) Admitted. Fixpoint subset (s1:bag) (s2:bag) : bool := (* FILL IN HERE *) admit. Example test_subset1: subset [1;2] [2;1;4;1] = true. (* FILL IN HERE *) Admitted. Example test_subset2: subset [1;2;2] [2;1;4;1] = false. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, optional (bag_theorem) *) (** Write down an interesting theorem about bags involving the functions [count] and [add], and prove it. Note that, since this problem is somewhat open-ended, it's possible that you may come up with a theorem which is true, but whose proof requires techniques you haven't learned yet. Feel free to ask for help if you get stuck! *) (* FILL IN HERE *) (** [] *) (* ###################################################### *) (** * Reasoning About Lists *) (** Just as with numbers, simple facts about list-processing functions can sometimes be proved entirely by simplification. For example, the simplification performed by [reflexivity] is enough for this theorem... *) Theorem nil_app : forall l:natlist, [] ++ l = l. Proof. reflexivity. Qed. (** ... because the [[]] is substituted into the match position in the definition of [app], allowing the match itself to be simplified. *) (** Also, as with numbers, it is sometimes helpful to perform case analysis on the possible shapes (empty or non-empty) of an unknown list. *) Theorem tl_length_pred : forall l:natlist, pred (length l) = length (tl l). Proof. intros l. destruct l as [| n l']. Case "l = nil". reflexivity. Case "l = cons n l'". reflexivity. Qed. (** Here, the [nil] case works because we've chosen to define [tl nil = nil]. Notice that the [as] annotation on the [destruct] tactic here introduces two names, [n] and [l'], corresponding to the fact that the [cons] constructor for lists takes two arguments (the head and tail of the list it is constructing). *) (** Usually, though, interesting theorems about lists require induction for their proofs. *) (* ###################################################### *) (** ** Micro-Sermon *) (** Simply reading example proofs will not get you very far! It is very important to work through the details of each one, using Coq and thinking about what each step of the proof achieves. Otherwise it is more or less guaranteed that the exercises will make no sense. *) (* ###################################################### *) (** ** Induction on Lists *) (** Proofs by induction over datatypes like [natlist] are perhaps a little less familiar than standard natural number induction, but the basic idea is equally simple. Each [Inductive] declaration defines a set of data values that can be built up from the declared constructors: a boolean can be either [true] or [false]; a number can be either [O] or [S] applied to a number; a list can be either [nil] or [cons] applied to a number and a list. Moreover, applications of the declared constructors to one another are the _only_ possible shapes that elements of an inductively defined set can have, and this fact directly gives rise to a way of reasoning about inductively defined sets: a number is either [O] or else it is [S] applied to some _smaller_ number; a list is either [nil] or else it is [cons] applied to some number and some _smaller_ list; etc. So, if we have in mind some proposition [P] that mentions a list [l] and we want to argue that [P] holds for _all_ lists, we can reason as follows: - First, show that [P] is true of [l] when [l] is [nil]. - Then show that [P] is true of [l] when [l] is [cons n l'] for some number [n] and some smaller list [l'], assuming that [P] is true for [l']. Since larger lists can only be built up from smaller ones, eventually reaching [nil], these two things together establish the truth of [P] for all lists [l]. Here's a concrete example: *) Theorem app_assoc : forall l1 l2 l3 : natlist, (l1 ++ l2) ++ l3 = l1 ++ (l2 ++ l3). Proof. intros l1 l2 l3. induction l1 as [| n l1']. Case "l1 = nil". reflexivity. Case "l1 = cons n l1'". simpl. rewrite -> IHl1'. reflexivity. Qed. (** Again, this Coq proof is not especially illuminating as a static written document -- it is easy to see what's going on if you are reading the proof in an interactive Coq session and you can see the current goal and context at each point, but this state is not visible in the written-down parts of the Coq proof. So a natural-language proof -- one written for human readers -- will need to include more explicit signposts; in particular, it will help the reader stay oriented if we remind them exactly what the induction hypothesis is in the second case. *) (** *** Informal version *) (** _Theorem_: For all lists [l1], [l2], and [l3], [(l1 ++ l2) ++ l3 = l1 ++ (l2 ++ l3)]. _Proof_: By induction on [l1]. - First, suppose [l1 = []]. We must show ([] ++ l2) ++ l3 = [] ++ (l2 ++ l3), which follows directly from the definition of [++]. - Next, suppose [l1 = n::l1'], with (l1' ++ l2) ++ l3 = l1' ++ (l2 ++ l3) (the induction hypothesis). We must show ((n :: l1') ++ l2) ++ l3 = (n :: l1') ++ (l2 ++ l3). ]] By the definition of [++], this follows from n :: ((l1' ++ l2) ++ l3) = n :: (l1' ++ (l2 ++ l3)), which is immediate from the induction hypothesis. [] *) (** *** Another example *) (** Here is a similar example to be worked together in class: *) Theorem app_length : forall l1 l2 : natlist, length (l1 ++ l2) = (length l1) + (length l2). Proof. (* WORKED IN CLASS *) intros l1 l2. induction l1 as [| n l1']. Case "l1 = nil". reflexivity. Case "l1 = cons". simpl. rewrite -> IHl1'. reflexivity. Qed. (** *** Reversing a list *) (** For a slightly more involved example of an inductive proof over lists, suppose we define a "cons on the right" function [snoc] like this... *) Fixpoint snoc (l:natlist) (v:nat) : natlist := match l with | nil => [v] | h :: t => h :: (snoc t v) end. (** ... and use it to define a list-reversing function [rev] like this: *) Fixpoint rev (l:natlist) : natlist := match l with | nil => nil | h :: t => snoc (rev t) h end. Example test_rev1: rev [1;2;3] = [3;2;1]. Proof. reflexivity. Qed. Example test_rev2: rev nil = nil. Proof. reflexivity. Qed. (** *** Proofs about reverse *) (** Now let's prove some more list theorems using our newly defined [snoc] and [rev]. For something a little more challenging than the inductive proofs we've seen so far, let's prove that reversing a list does not change its length. Our first attempt at this proof gets stuck in the successor case... *) Theorem rev_length_firsttry : forall l : natlist, length (rev l) = length l. Proof. intros l. induction l as [| n l']. Case "l = []". reflexivity. Case "l = n :: l'". (* This is the tricky case. Let's begin as usual by simplifying. *) simpl. (* Now we seem to be stuck: the goal is an equality involving [snoc], but we don't have any equations in either the immediate context or the global environment that have anything to do with [snoc]! We can make a little progress by using the IH to rewrite the goal... *) rewrite <- IHl'. (* ... but now we can't go any further. *) Abort. (** So let's take the equation about [snoc] that would have enabled us to make progress and prove it as a separate lemma. *) Theorem length_snoc : forall n : nat, forall l : natlist, length (snoc l n) = S (length l). Proof. intros n l. induction l as [| n' l']. Case "l = nil". reflexivity. Case "l = cons n' l'". simpl. rewrite -> IHl'. reflexivity. Qed. (** Note that we make the lemma as _general_ as possible: in particular, we quantify over _all_ [natlist]s, not just those that result from an application of [rev]. This should seem natural, because the truth of the goal clearly doesn't depend on the list having been reversed. Moreover, it is much easier to prove the more general property. *) (** Now we can complete the original proof. *) Theorem rev_length : forall l : natlist, length (rev l) = length l. Proof. intros l. induction l as [| n l']. Case "l = nil". reflexivity. Case "l = cons". simpl. rewrite -> length_snoc. rewrite -> IHl'. reflexivity. Qed. (** For comparison, here are informal proofs of these two theorems: _Theorem_: For all numbers [n] and lists [l], [length (snoc l n) = S (length l)]. _Proof_: By induction on [l]. - First, suppose [l = []]. We must show length (snoc [] n) = S (length []), which follows directly from the definitions of [length] and [snoc]. - Next, suppose [l = n'::l'], with length (snoc l' n) = S (length l'). We must show length (snoc (n' :: l') n) = S (length (n' :: l')). By the definitions of [length] and [snoc], this follows from S (length (snoc l' n)) = S (S (length l')), ]] which is immediate from the induction hypothesis. [] *) (** _Theorem_: For all lists [l], [length (rev l) = length l]. _Proof_: By induction on [l]. - First, suppose [l = []]. We must show length (rev []) = length [], which follows directly from the definitions of [length] and [rev]. - Next, suppose [l = n::l'], with length (rev l') = length l'. We must show length (rev (n :: l')) = length (n :: l'). By the definition of [rev], this follows from length (snoc (rev l') n) = S (length l') which, by the previous lemma, is the same as S (length (rev l')) = S (length l'). This is immediate from the induction hypothesis. [] *) (** Obviously, the style of these proofs is rather longwinded and pedantic. After the first few, we might find it easier to follow proofs that give fewer details (since we can easily work them out in our own minds or on scratch paper if necessary) and just highlight the non-obvious steps. In this more compressed style, the above proof might look more like this: *) (** _Theorem_: For all lists [l], [length (rev l) = length l]. _Proof_: First, observe that length (snoc l n) = S (length l) for any [l]. This follows by a straightforward induction on [l]. The main property now follows by another straightforward induction on [l], using the observation together with the induction hypothesis in the case where [l = n'::l']. [] *) (** Which style is preferable in a given situation depends on the sophistication of the expected audience and on how similar the proof at hand is to ones that the audience will already be familiar with. The more pedantic style is a good default for present purposes. *) (* ###################################################### *) (** ** [SearchAbout] *) (** We've seen that proofs can make use of other theorems we've already proved, using [rewrite], and later we will see other ways of reusing previous theorems. But in order to refer to a theorem, we need to know its name, and remembering the names of all the theorems we might ever want to use can become quite difficult! It is often hard even to remember what theorems have been proven, much less what they are named. Coq's [SearchAbout] command is quite helpful with this. Typing [SearchAbout foo] will cause Coq to display a list of all theorems involving [foo]. For example, try uncommenting the following to see a list of theorems that we have proved about [rev]: *) (* SearchAbout rev. *) (** Keep [SearchAbout] in mind as you do the following exercises and throughout the rest of the course; it can save you a lot of time! *) (** Also, if you are using ProofGeneral, you can run [SearchAbout] with [C-c C-a C-a]. Pasting its response into your buffer can be accomplished with [C-c C-;]. *) (* ###################################################### *) (** ** List Exercises, Part 1 *) (** **** Exercise: 3 stars (list_exercises) *) (** More practice with lists. *) Theorem app_nil_end : forall l : natlist, l ++ [] = l. Proof. (* FILL IN HERE *) Admitted. Theorem rev_involutive : forall l : natlist, rev (rev l) = l. Proof. (* FILL IN HERE *) Admitted. (** There is a short solution to the next exercise. If you find yourself getting tangled up, step back and try to look for a simpler way. *) Theorem app_assoc4 : forall l1 l2 l3 l4 : natlist, l1 ++ (l2 ++ (l3 ++ l4)) = ((l1 ++ l2) ++ l3) ++ l4. Proof. (* FILL IN HERE *) Admitted. Theorem snoc_append : forall (l:natlist) (n:nat), snoc l n = l ++ [n]. Proof. (* FILL IN HERE *) Admitted. Theorem distr_rev : forall l1 l2 : natlist, rev (l1 ++ l2) = (rev l2) ++ (rev l1). Proof. (* FILL IN HERE *) Admitted. (** An exercise about your implementation of [nonzeros]: *) Lemma nonzeros_app : forall l1 l2 : natlist, nonzeros (l1 ++ l2) = (nonzeros l1) ++ (nonzeros l2). Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 2 stars (beq_natlist) *) (** Fill in the definition of [beq_natlist], which compares lists of numbers for equality. Prove that [beq_natlist l l] yields [true] for every list [l]. *) Fixpoint beq_natlist (l1 l2 : natlist) : bool := (* FILL IN HERE *) admit. Example test_beq_natlist1 : (beq_natlist nil nil = true). (* FILL IN HERE *) Admitted. Example test_beq_natlist2 : beq_natlist [1;2;3] [1;2;3] = true. (* FILL IN HERE *) Admitted. Example test_beq_natlist3 : beq_natlist [1;2;3] [1;2;4] = false. (* FILL IN HERE *) Admitted. Theorem beq_natlist_refl : forall l:natlist, true = beq_natlist l l. Proof. (* FILL IN HERE *) Admitted. (** [] *) (* ###################################################### *) (** ** List Exercises, Part 2 *) (** **** Exercise: 2 stars (list_design) *) (** Design exercise: - Write down a non-trivial theorem involving [cons] ([::]), [snoc], and [app] ([++]). - Prove it. *) (* FILL IN HERE *) (** [] *) (** **** Exercise: 3 stars, advanced (bag_proofs) *) (** Here are a couple of little theorems to prove about your definitions about bags earlier in the file. *) Theorem count_member_nonzero : forall (s : bag), ble_nat 1 (count 1 (1 :: s)) = true. Proof. (* FILL IN HERE *) Admitted. (** The following lemma about [ble_nat] might help you in the next proof. *) Theorem ble_n_Sn : forall n, ble_nat n (S n) = true. Proof. intros n. induction n as [| n']. Case "0". simpl. reflexivity. Case "S n'". simpl. rewrite IHn'. reflexivity. Qed. Theorem remove_decreases_count: forall (s : bag), ble_nat (count 0 (remove_one 0 s)) (count 0 s) = true. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, optional (bag_count_sum) *) (** Write down an interesting theorem about bags involving the functions [count] and [sum], and prove it.*) (* FILL IN HERE *) (** [] *) (** **** Exercise: 4 stars, advanced (rev_injective) *) (** Prove that the [rev] function is injective, that is, forall (l1 l2 : natlist), rev l1 = rev l2 -> l1 = l2. There is a hard way and an easy way to solve this exercise. *) (* FILL IN HERE *) (** [] *) (* ###################################################### *) (** * Options *) (** One use of [natoption] is as a way of returning "error codes" from functions. For example, suppose we want to write a function that returns the [n]th element of some list. If we give it type [nat -> natlist -> nat], then we'll have to return some number when the list is too short! *) Fixpoint index_bad (n:nat) (l:natlist) : nat := match l with | nil => 42 (* arbitrary! *) | a :: l' => match beq_nat n O with | true => a | false => index_bad (pred n) l' end end. (** *** *) (** On the other hand, if we give it type [nat -> natlist -> natoption], then we can return [None] when the list is too short and [Some a] when the list has enough members and [a] appears at position [n]. *) Inductive natoption : Type := | Some : nat -> natoption | None : natoption. Fixpoint index (n:nat) (l:natlist) : natoption := match l with | nil => None | a :: l' => match beq_nat n O with | true => Some a | false => index (pred n) l' end end. Example test_index1 : index 0 [4;5;6;7] = Some 4. Proof. reflexivity. Qed. Example test_index2 : index 3 [4;5;6;7] = Some 7. Proof. reflexivity. Qed. Example test_index3 : index 10 [4;5;6;7] = None. Proof. reflexivity. Qed. (** This example is also an opportunity to introduce one more small feature of Coq's programming language: conditional expressions... *) (** *** *) Fixpoint index' (n:nat) (l:natlist) : natoption := match l with | nil => None | a :: l' => if beq_nat n O then Some a else index' (pred n) l' end. (** Coq's conditionals are exactly like those found in any other language, with one small generalization. Since the boolean type is not built in, Coq actually allows conditional expressions over _any_ inductively defined type with exactly two constructors. The guard is considered true if it evaluates to the first constructor in the [Inductive] definition and false if it evaluates to the second. *) (** The function below pulls the [nat] out of a [natoption], returning a supplied default in the [None] case. *) Definition option_elim (d : nat) (o : natoption) : nat := match o with | Some n' => n' | None => d end. (** **** Exercise: 2 stars, optional (hd_opt) *) (** Using the same idea, fix the [hd] function from earlier so we don't have to pass a default element for the [nil] case. *) Definition hd_opt (l : natlist) : natoption := (* FILL IN HERE *) admit. Example test_hd_opt1 : hd_opt [] = None. (* FILL IN HERE *) Admitted. Example test_hd_opt2 : hd_opt [1] = Some 1. (* FILL IN HERE *) Admitted. Example test_hd_opt3 : hd_opt [5;6] = Some 5. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 1 star, optional (option_elim_hd) *) (** This exercise relates your new [hd_opt] to the old [hd]. *) Theorem option_elim_hd : forall (l:natlist) (default:nat), hd default l = option_elim default (hd_opt l). Proof. (* FILL IN HERE *) Admitted. (** [] *) (* ###################################################### *) (** * Dictionaries *) (** As a final illustration of how fundamental data structures can be defined in Coq, here is the declaration of a simple [dictionary] data type, using numbers for both the keys and the values stored under these keys. (That is, a dictionary represents a finite map from numbers to numbers.) *) Module Dictionary. Inductive dictionary : Type := | empty : dictionary | record : nat -> nat -> dictionary -> dictionary. (** This declaration can be read: "There are two ways to construct a [dictionary]: either using the constructor [empty] to represent an empty dictionary, or by applying the constructor [record] to a key, a value, and an existing [dictionary] to construct a [dictionary] with an additional key to value mapping." *) Definition insert (key value : nat) (d : dictionary) : dictionary := (record key value d). (** Here is a function [find] that searches a [dictionary] for a given key. It evaluates evaluates to [None] if the key was not found and [Some val] if the key was mapped to [val] in the dictionary. If the same key is mapped to multiple values, [find] will return the first one it finds. *) Fixpoint find (key : nat) (d : dictionary) : natoption := match d with | empty => None | record k v d' => if (beq_nat key k) then (Some v) else (find key d') end. (** **** Exercise: 1 star (dictionary_invariant1) *) (** Complete the following proof. *) Theorem dictionary_invariant1' : forall (d : dictionary) (k v: nat), (find k (insert k v d)) = Some v. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 1 star (dictionary_invariant2) *) (** Complete the following proof. *) Theorem dictionary_invariant2' : forall (d : dictionary) (m n o: nat), beq_nat m n = false -> find m d = find m (insert n o d). Proof. (* FILL IN HERE *) Admitted. (** [] *) End Dictionary. End NatList. (* $Date: 2014-01-28 12:19:45 -0600 (Tue, 28 Jan 2014) $ *)